NOTES:
1.MATERIAL:
1.1 INSULATOR:LCP E130i WITH 30% G/F UL 94V-0 COLOR:BLACK
1.2 CONTACT:BRASS C2680 T=0.20MM
1.3 SHELL:STEEL T=0.5MM
2.PLATING SPECIFICATION:
2.1 CONTACTS:Ni 50u" MIN. UNDER PLATED,GOLD FLASH PLATED
ON THE MATING AREA OF CONTACT.
MATTE Sn MIN. PLATED ON THE SOLDER TALL.
2.2 FRONT SHELL:Black Ni or Ni 50u"MIN. UNDER PLATED OVER ALL.
3.ELECTRICAL CHARACTERISTIC:
3.1 LOW LEVEL CONTACT RESISTANCE:30mΩ MAX.
3.2 DIELECTIC WITHSTANDING VOLTAGE:
300 VAC BETWEEN ADJACENT TERMINAL OR GROUND,No Breakdown
3.3 INSULATION RESISTANCE:100MΩ MINIMUM(Unmated).
10MΩ MINIMUM(Mated).
4.MECHANICAL CHARACTERISTIC:
4.1 INSERTION FORCE:44.1N(4.5kgf)MAXIMUM.
4.2 EXTRACTION FORCE:
INITIAL:9.8N(1.0kgf)-39.2N(4.0kgf).
AFTER 2001 TO 10000 CYCLES:4.9N(0.5kgf)-39.2N(4.0kgf).
5.SALT SPRAY TEST: 24H